PRS-7391 Time Synchronization
PRS-7391 time synchronization device is applicable to substations and power plants with the voltage grade ranking at or above 10KV, which provides time and synchronization information for various secondary equipments in the plants and stations, such as dispatch automation system, microcomputer relay protection device, fault recorder, event sequence recording device, tele-control device (RTU), computer data exchanging network, intelligent electronic device (IED), etc.
https://global.sznari.com/upload/images/product/20230904/16937974014595497.png
Scope of Application

PRS-7391 time synchronization device is applicable to substations and power plants with the voltage grade ranking at or above 10KV, which provides time and synchronization information for various secondary equipments in the plants and stations, such as dispatch automation system, microcomputer relay protection device, fault recorder, event sequence recording device, tele-control device (RTU), computer data exchanging network, intelligent electronic device (IED), etc.

Advantages
01
Recording
This device has a self-diagnostic record processing mechanism, so the latest 1024 record reports can be saved.
02
SNTP/NTP protocol
This device supports the SNTP/NTP protocol and can work as a network time server.
03
IEEE 1588 protocol
This device supports the IEEE 1588V2 protocol (BC mode and OC mode) for clock synchronization.
04
Signal reception
This device provides 2 reception channels for IRIG-B signal via its optical port or RS-485/422 port. In addition, it supports link-based reception time delay compensation.
05
Time service
This device supports GPS (Global Positioning System) and BDS (BeiDou Navigation Satellite System). In addition, it supports antenna transmission time delay compensation.
06
Remote supervision
This device supports local SCADA and remote control centre communication in using of protocols such as IEC 61850 to realize the device running status supervision.
07
Output clock synchronization signal
The kinds of output clock synchronization signal is rich, including PPS (Pulse Per Second), PPM (Pulse Per Minute), PPH (Pulse Per Hour), IRIG-B signal, timing message (serial), SNTP/NTP timing message (network), IEEE 1588 signal, etc.
08
Output interface
Various types of output interfaces are provided, including RS-484, RS-232, TTL, dry contact, AC modulation, optic fiber, RJ45, etc.
09
Dual power supplies redundancy
Dual power supply module is an option,The extra power supply module will be placed next to each other and works independently.
010
Double devices redundancy strategy
Two PRS-7391 can form a "dual source, dual network" clock synchronization system with a interconnection in using of IRIG-B signal.
011
Output interface extension
The output interface extension is very flexible. Full support for up to 9 output modules, All signal outputs of the devices are isolated with strong anti-interference capability;
012
Human machine interface
The friendly HMI provides 5.7’’ LCD and navigation keypad for the display of real time, satellite tracking status, IRIG-B inputting status, current clock source, etc.
Technical Features
Specifications

Case dimensions

482.6mm×177.0mm×283.0mm (W × H × D)  

Extreme working temperature

-40℃~70℃

Storage and transportation

-40℃~70℃

Atmospheric pressure

66kPa~108kPa

Working power

DC/AC 220V, DC 110V, allowable   deviation: -20%~+15%

Input time source signal

Support time source signal input   from Beidou, GPS and optical fiber IRIG-B (DC)

Accuracy of time output signal

Accuracy of pulse time signal   (PPS/PPM/PPH): <500ns

Accuracy of IRIG-B (DC): <500ns

Accuracy of port time signal: <5ms

Accuracy of NTP time signal: <1ms

Accuracy of PTP time signal: <1us

Timing accuracy

Timing accuracy within 12h: <1us/h

Related solutions
https://global.sznari.com/upload/images/article/20230904/16938221605945256.jpg
Overall Solution of Intelligent Substation
The intelligent substation solution of CYG SUNRI supports the functions of comprehensive state perception, replacement by operational machine, information interconnection and sharing, and friendly human-computer interaction, which can solve the problems of tedious manual transcription of meters in traditional substations, scattered online monitoring systems of equipment, incomplete video coverage,difficulty to accessauxiliary control and complicated manual switching operation,effectively improve the intelligent level of equipment and the quality and efficiency of transportation and inspection, support the construction of centralized control stations, and promote the digital transformation of equipment management.
https://global.sznari.com/upload/images/article/20230904/16938224797784780.jpg
Intelligent Substation Solution (1000kV and Below)
Intelligent substation is an important part of the intelligent power grid, while the integrated monitoring system is the basis for dispatching control and production management in the intelligent power grid. The PRS-7000 monitoring system of CYG SUNRI meets the requirements of digital information of entire station, network-based communication platform and standard information sharing, and various functions have been realized, such as uniform access, storage and display of station information, operation monitoring, operation and control, comprehensive information analysis and intelligent alarm, operation management and auxiliary applications.
https://global.sznari.com/upload/images/article/20230904/16938253717371213.jpg
Overall Solution of Conventional Substation (1000kV and Below)
The PRS-7000 system of CYG SUNRI meets the requirements of digital information of whole station, network-based communication platform and standard information sharing, and various functions have been realized, such as uniform access, storage and display of station information, operation monitoring, operation and control, comprehensive information analysis and intelligent alarm, operation management and auxiliary applications.
https://global.sznari.com/upload/images/article/20230904/16938304796465589.jpg
New Energy Central Control And Monitoring System Solution
As various power generation groups and enterprises increase their investment in the new energy industry, the number of stations and the installed capacity continue to grow,which has generated difficulties and challenges in operation and management. Following the concepts of intensification, process-orientation,normalization and standardization, the new energy centralized control system of CYG SUNRI is designed based on the idea of regional centralized management.By collecting the equipment information of subordinate power stations,the system can satisfy the requirements of panoramic monitoring of power station operation,comprehensive statistical analysis, intelligent fault diagnosis,and scientific production management of enterprises. At the same time, it can also meet the requirement to conduct the operational evaluation and management assessment of power stations by the power supply company dispatching center.